Ravine DSP InterState v1.2.3 [WiN]

查看演示

Team R2R | 08 July 2026 | 10.5 MB

Inter::State 将路由、宏控制、调制、诊断和调用功能整合到一个固定的工作空间中，围绕您已有的效果器展开。无需再为分散的插件窗口、一次性的控制器映射和电平匹配的繁琐操作而烦恼，即可构建复杂的信号链。

这是一个适用于复杂路由架构的 VST3/AU 宿主环境。DAW

混音器在处理精细信号时效率低下。Inter::State 是一个独立的宿主程序，可在单个插入槽内以串行、并行或多频段配置运行您现有的插件。它提供了第三方插件所省略的底层实用功能——过采样、相位校准和 LUFS 匹配，从而避免了杂乱的辅助轨道和路由变通方案。

核心规格
：多频段和并行路由：通过相位精确的分频器或并行路径分割音频。在内部将它们重新混合，无需管理外部辅助轨道或引入宿主延迟补偿误差。

每个插件槽位过采样（最高 16 倍）：对任何托管插件应用均匀、高质量的过采样，强制旧款 DSP 在更高的采样率下流畅运行。

内置增益级：真实、电平匹配的 A/B 监听。使用自动匹配进行精确的电平校正，或使用自动增益在您微调时进行连续的 LUFS 补偿。

相位和时间校准：每个插件槽位的微延迟偏移和相位反转。在求和之前，校正并行链中第三方饱和器和均衡器引入的相位偏移。

诊断可视化工具：实时频谱分析、计量和高帧率示波器视图，可精确放置在信号路径中的所需位置。

Inter::State brings routing, macro control, modulation, diagnostics, and recall into one workspace around the effects you already own. Build complex chains without the usual mess of scattered plugin windows, one-off controller mappings, and level-matching guesswork.

A VST3/AU host environment for complex routing architectures.

DAW mixers are inefficient for granular signal processing. Inter::State is a self-contained host that runs your existing plugins in serial, parallel, or multiband configurations inside a single insert slot. It provides the low-level utility functions – oversampling, phase alignment, and LUFS matching – that your third-party plugins omitted, keeping your session free of cluttered aux tracks and routing workarounds.

Core Specifications
Multiband & Parallel Routing: Split audio via phase-accurate crossovers or parallel paths. Sum them back internally without managing external aux tracks or inducing host delay compensation errors.

Per-Slot Oversampling (Up to 16x): Apply uniform, high-quality oversampling to any hosted plugin, forcing older DSP to operate cleanly at higher sample rates.

Gain Staging Built In: Honest, level-matched A/B monitoring. Use Auto-Match for a committed level correction or Auto-Gain for continuous LUFS compensation while you tweak.

Phase & Time Alignment: Micro-delay offsets and phase inversion per slot. Correct the phase shift introduced by third-party saturators and EQs in parallel chains before summing.

Diagnostic Visualisers: Real-time spectrum analysis, metering, and high-framerate oscilloscope views placed exactly where you need them in the signal path.