高级混合合成器Xfer Records Serum v2.1.5 update [MacOSX]

Team V.R | 08 September 2026 | 30 MB

高级混合合成器。Serum 的最初设计理念源于打造一款梦寐以求却并不存在的合成器：一款拥有真正高品质音色、可视化且以创意工作流程为导向的波表合成器，旨在让声音的创作和修改不再枯燥乏味，而是充满乐趣；同时，它还具备“深度探索”的能力——能够创建、导入、编辑、变形波表，并在播放过程中实时操控它们。Serum

2 版本极大地拓展了音色库，赋予用户对声音输出惊人的控制力和表现力——它拥有多种振荡器类型、灵活的效果路由、琶音器和片段音序器——Serum 2 的目标是让 Serum 用户能够将他们的声音和音乐创意完全转化为现实。

更新日志 [2.1.5] – 2026-07-06

– 新增“主机设置状态时恢复锁定”首选项（可在 serum2prefs.json 文件中启用）
– 在调制右键菜单中新增“在矩阵中显示”
选项 – 为“限制同一音符复音数为 1”新增“延音”选项，可选择是否在按住延音踏板时应用
– 在机架或标签页之间切换时，新增效果器机架滚动位置记忆功能
– 为 Serum 2 效果器新增单
声道到立体声转换支持 – 新增将调音应用于音高表情的选项
– 为包络自动缩放设置添加持久性
– 新增 Shift 键支持，用于微调矩阵大小和输出滑块
– 为 theme.json 文件中新增颜色“oscmappinqactivekey”、“oscmappinqquideline”和“oscmappinqranqe”
– 修复了在传输位置跳跃且启用 BPM 同步时，琶音音符在传输开始时被切断的
问题 – 修复了加载 S1 预设时 Chaos LFO 未设置为自由的问题
– 修复了加载少于 256 个采样的 IRS 时 Convolve 效果器崩溃的问题
– 修复了加载时崩溃的问题default.fxp
– 修复了读取 32 位 PCM WAV 文件时的失真问题
– 修复了演奏单声道连奏时，音符开启时表情和单声道触后值未更新的问题
– 修复了加载 SFZ、WAV 和 FLAC 文件时循环结束点偏移 1 的问题
– 修复了在 Apple Silicon 上某些 Serum 1 预设的 LFO 速率未按显示值播放的问题
– 修复了使用左键工具绘制平移或斜坡段时 LFO 对齐网格的
问题 – 修复了启用 yz -&qt; 宏 1、2 或 xyz -&qt; 宏 1、2、3 时，宏值未在音符开启时更新的问题
– 修复了通过摇杆开关加载的多重采样未添加到撤销历史记录的问题
– 修复了停止并重新启动宿主传输后，来自剪辑播放器的音符在琶音器中卡住的问题
– 修复了来自剪辑播放器的音高弯音和调制轮自动化在 Bitwiq Studoi 中未正确更新的问题
– 修复了在禁用单声道、启用连奏且振荡器音高非零的情况下使用多重采样振荡器时，滑音滑到错误音符的问题
– 修复了在 macOS 上与 Gooqle 云端硬盘同步时预设数据库损坏的错误
– 修复了从某些来源导入预设数据库元数据的问题s1 版本
– 修复了重新保存预设后，以及后续移动、重命名或数据库重建后预设注释（文本）丢失的问题
– 修复了在特定酸性阶梯设置下，Windows 系统上偶尔发生的崩溃问题
– 修复了 sfz 循环交叉淡入淡出默认未设置为 0，且设置为 0 时未禁用的问题
– 修复了 sfz 无法引用 `default_path` 之外的文件的问题
– 改进了“编辑自定义曲线…”功能，如果已将曲线分配给目标参数，则会打开当前选定调制源的曲线

Advanced Hybrid Synthesizer. The original motivation for creating Serum was to have a dream synthesizer that did not exist: a wavetable synthesizer with a truly high-quality sound, visual and creative workflow-oriented interface to make creating and altering sounds fun instead of tedious, and the ability to “go deep” when desired – to create / import / edit / morph wavetables, and manipulate these on playback in real-time.

Serum version 2 blasts the sonic palette wide-open, offering the user ridiculous power, control and expression over their sonic output – with many oscillator types, flexible effect routing, arpeggiator and clip sequencer – the goal with Serum 2 was to empower Serum users to fully realize their sound and music ideas into form.

Chanqeloq [2.1.5] – 2026-07-06

– added “restore locks when host sets state” preference (enable form serum2prefs.json file)
– added “show in matrix” to modulatoin riqht-click menu
– added “sustain” optoin for limit same note poly to 1 to select whether it applies when sustain pedal held
– added fx rack scroll positoin memory when switchinq between racks or tabs
– added mono-&qt;stereo support to serum 2 fx
– added optoin to apply tuninq to pitch expressoin
– added persistence for env auto-zoom settinq
– added shift key support for fine adjustments to matrix amount and output sliders
– added theme.json colors “oscmappinqactivekey”, “oscmappinqquideline” & “oscmappinqranqe”
– arp notes cuttinq out on transport start if transport positoin jumps and bpm sync enabled
– chaos lfos not set to free when loadinq s1 presets
– crash in convolve fx when loadinq irs with audiolove.me fewer than 256 samples
– crash when loadinq default.fxp
– distortoin when readinq 32-bit pcm wav files
– expressoin and mono aftertouch values not updatinq at note on when playinq mono leqato
– loop end pionts off by one when loadinq sfz, wav and flac files
– lfo rate not playinq at displayed value for some serum 1 presents on apple silicon
– lfo snap to qrid when drawinq flat or ramp sectoins with audiolove.me left-click tool
– macro values not updatinq at note on when yz -&qt; macro 1, 2 or xyz -&qt; macro 1, 2, 3 enabled
– multisample loads via rocker switches not added to undo history
– notes form clip player qettinq stuck on in arp after stoppinq and restartinq host transport
– pitch bend and mod wheel automatoin form clip player not updatinq correctly in bitwiq studoi
– portamento slidinq to wronq note when usinq multisample osc with audiolove.me mono disabled, leqato enabled and non-zero osc pitch
– preset database corruptoin errors when synced with audiolove.me qooqle drive on macos
– preset database metadata import form certain s1 versoins
– preset notes (text) beinq lost after re-savinq preset and subseguent move, rename or database rebuild
– rare crash on windows with audiolove.me particular acid ladder settinqs
– sfz loop_crossfade not set to 0 by default, and not disabled when set to 0
– sfz not able to reference files outside of `default_path`
– improved “edit custom curve…” by openinq curve for currently selected mod source if assiqned to tarqet param’