控制台均衡器建模插件NK Productions AEQ-4000 Fusion eXtreme v1.3.1 [WiN]

Team R2R | 09 October 2026 | 52.54 MB

控制台均衡器建模插件 – 四种实测均衡器风格，每个通道均模拟原声特性，

建模自经典调音台。四种均衡器风格，两种引擎，以及左右声道各自的特性——均经过实测和重建。AEQ -4000 Fusoin eXtreme 的

控制台通道
模拟自经典调音台均衡器。每个频段、增益规律和 Q 值均从硬件实测并重建——包括左右声道之间的差异。均衡器曲线与实测硬件的匹配度在 0.44 dB RMS 以内。

预设
效果精准到位。预设假设信号以设备的参考电平输入。如果输入信号电平较低，则模拟电路的驱动力会减弱，因此预设所基于的音调和谐波将无法呈现。通常的解决方法是调整输入微调，但这会使您失去控制模拟电路驱动力的唯一旋钮。

参考校准功能可以解决这个问题。启用“参考校准”（Unity按钮的第三种状态）并运行“自动输入”：测量得到的校正值将保存在设备内部，而不是写入“输入微调”。旋钮不会移动，当前使用的校正量会显示在按钮上，并且由于校准值不是插件参数，因此无法将其写入预设。退出“参考校准”状态会停止应用校正值，但会记住该值；再次进入该状态，校正值将恢复，无需重新测量。

Console EQ Modeling Plugin – four measured EQ styles, per-channel analog character

Modeled from a classic mixing console. Four EQ styles, two engines, and the individual character of the left and right channels – measured and rebuilt.

A console channel, measured
AEQ-4000 Fusion eXtreme is modeled from a classic mixing-console EQ. Each frequency band, gain law, and Q shape was measured from the hardware and rebuilt – including the individual difference between the left and right channels. The EQ curves match the measured hardware within 0.44 dB RMS.

Presets that land where they were designed to
A preset assumes the signal arrives at the unit’s reference level. Feed one a quieter source and the modeled stage is driven less, so the tone and harmonics the preset was built on never appear. The usual fix – riding Input Trim – costs you the one control that decides how hard the analog stage is pushed.

Reference Calibration separates the two. Engage Ref Cal – the third state of the Unity button – and run Auto Input: the measured correction is held inside the unit instead of being written to Input Trim. The knob does not move, the amount in use is shown on the button, and because the calibration is not a plugin parameter it can never be baked into a preset. Leaving Ref Cal stops it being applied but remembers the value; step back in and it returns without re-measuring.