母带效果器Metric Halo Make Believe CGII v4.1.0.264 [WiN]

Team R2R | 19 March 2026 | 22.4 MB

能力越大

，责任越大。使用 CGII，让您的母带音量更大
，同时保留原始混音的清晰度、密度和力度。即使您的混音已经足够响亮，您也可以在此基础上再提升一些，而不会产生令人不悦的失真，也不会使声音变得扁平或削弱低频的活力。同时，您可以控制节目的真峰值电平，确保不会出现采样间过载。

我们还加入了抖动、直流阻隔滤波器和完整的 LUFS/真峰值电平表，因此您可以将 CGII 放置在母带处理链的末端，作为最终处理的一站式解决方案。

虽然 CGII 最初的设计目标是同时提升音量和质量，但您会发现它在混音和处理链的各个环节都表现出色。

使用响度处理器可以激发谐波。使用密度处理器可以增强声音的饱满度和低电平清晰度，而不会影响瞬态响应。或者，您可以简单地将极其透明的真峰值前瞻限制放置在您需要的任何位置。

一位女巫说：* 运行不需要 iLok 许可证管理器。* 我们的版本加载速度更快，占用内存更少，比正版软件更省内存。

With great power comes great responsibility.

Make it Good & Loud
Use CGII to make your masters loud without losing the clarity, density and heft of the original mix. Even if you are working with a mix that is already loud, you can give it a little extra, without adding unpleasant distortion and without flattening out the material and sucking the life out of the low end. At the same time you can control the true-peak level of the program to ensure that there are no inter-sample overs.

We’ve also included dither, a DC-block filter and complete LUFS/True Peak metering so that you can place CGII at the end of your master chain as a one-stop shop for final processing.

While CGII’s original spec was to make things good & loud simultaneously, you will find that it is wonderful in a variety places in your mixing and processing chain.

Use the Loudness processor to excite harmonics. Use the Density processor to bring up the bloom and raise low-level clarity without affecting transients. Or simply put the incredibly transparent true-peak lookahead limit any place you need it.

A witch said,

* iLok License Manager isn’t required to run.
* Our release loads faster and uses less memory than legit version.